| |
C267 Description
The C267 is a member of the Ryeso
Comm Series of
controllers. The main goal for this module is to add standard I/O capability to existing
and future Ryeso
Controllers via MODBUS RTU communication. A secondary
application for the controller is for use with PLC’s manufactured by others
and for gathering information from remote sensors.
|
C267 Specifications
| Input Voltage |
9 to 28 VDC |
| Operating Temperature |
-22 to 158 °F (-30 to 70 °C) |
| Storage Temperature |
-22 to 158 °F (-30 to 70 °C) |
| Communications: |
1 – RS-485 9600-N-8-1 Communication port.
Connection is made via modular RJ45 Jack. There are two jacks for simple connection to
other Comm Series Modules. The user can plug from the master controller into the C267. A
second cable can then be run from the other jack to the next Comm Series Module. This can
be repeated until the customers I/O resources are satisfied. The last module in the line
must have a terminating resistor installed in the second jack. This module is available
from MurCal as part number 65267485TERMM. |
| Digital Inputs |
8 - optically isolated inputs (positive
voltage or ground) |
| Analog Inputs |
7 - 8-bit. Each analog individually shunt
selectable for 0-5 VDC, end of line 4-20 ma, or resistive sending unit. |
| Frequency Input |
1 - Optically isolated frequency input
requiring 3 VAC rms up to 100 Hz and 2 VAC rms above 100 Hz. Used for speed
reference. Range: 60 - 10,000 Hz. |
| Outputs |
8 - FET Outputs rated at 5 amps with a total
current draw through the unit not to exceed 18 Amps when both PWR2 pins are connected.
|
For more detailed information on this platform, please click here.
|
