The EMS448 Electronic Monitoring System / Controller is
micro-processor based for monitoring and control of equipment functions. The basic EMS
system is programmed for a typical industrial engine power unit. Custom programming is
available to adapt the EMS to a wide variety of engine and equipment requirements. This
unit is comes in a NEMA 4X enclosure for use in outdoor environments. It is perfect for
farming applications.
Basic programs provide auto-start/manual start and first-out
shutdown for engine functions such as pressure, temperature, level and overspeed.
Necessary time delays for startup lockout are included.
Operating data is displayed on a 32 character back lit
alphanumeric liquid crystal display.
The EMS operating parameters are configured through a simple
three-button interface. Access to the system memory is controlled by entry codes. A
password-protected program uses built-in memory to display the alarm/shutdown history,
including a display of the last ten shutdowns, when and why they occurred, and displays
all of the engine operating conditions at the time of last shutdown.
Standard Program Features
An on-board hourmeter keeps a log of equipment running hours and
alerts you when to change oil, filters and perform other routine service. Ramp Oil
pressure monitoring protects equipment at both high rated speed and low idle speed. The
program features basic start / stop, engine warm-up / cooldown, delay on start / stop,
automatic throttling, and prelube / glowplug functions.
For a list of standard programs available for this control
platform, click here.
